Fabhind Private Limited
Vatva, Ahmedabad, Gujarat
GST No. 24AAECF8830G1ZP
TrustSEAL Verified
Call 0804765547469% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Capacity | 200 Ton |
| Usage/Application | Road Construction |
| Brand | FABHIND |
| Voltage | 415 |
| Size | FAB-2500 |
| Automation Grade | Automatic |
| Driven Type | AUTO |
| Country of Origin | Made in India |
TECHNICAL SPECIFICATION
ASPHALT BATCH MIX PLANT MODEL FAB-1500 RAP
ASPHALT HOT MIX BATCH TYPE PLANT capacity 120 TPH is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand/Make | FABHIND |
| Usage/Application | ROAD CONTRACTION MACHINE |
| Size | DM-50 |
| Driven Type | SEMI AUTO |
| Capacity | 120 tph |
| Voltage | 415 |
| No Of Bins Total Storage | 4 BINS |
| Automation Grade | Manual |
| Brand | FABHND |
Specifications:
| Capacity @ 3% moisture content | DM – 35 | DM – 45 | DM – 50 | DM – 60 | DM – 65 |
| Cold Feed Bins | |||||
| Capacity @ 3% moisture content | 45 tph | 60 tph | 90 tph | 120 tph | 150 tph |
| No.of Bins*/Total Storage | 4/20 m3 | 4/20 m3 | 4/25 m3 | 4/31.25 m3 | 4/37.5 m3 |
| capacity Auxiliary Drive | 1.1 kW | 1.5 kW | 1.5 kW | 2.2 kW | 2.2 kW |
| Auxiliary Conveyor Belt | 450 mm x 2.2 m | 450 mm x 2.2 m | 450 mm x 2.9 m | 450 mm x 3.78 m | 450 mm x 3.78 m |
| Charging Width Gathering | 2.55 m | 2.55 m | 3.05 m | 3.66 m | 3.66 m |
| Conveyor Drive Gathering | 3.7 kW | 3.7 kW | 3.7 kW | 5.5 kW | 5.5 kW |
| Conveyor Belt Feeding | 500 mm x 22.4 m | 500 mm x 22.4 m | 600 mm x 25.6 m | 600 mm x 29 m | 600 mm x 29 m |
| Capacity | 80 tph | 100 tph | 120 tph | 150 tph | 200 tph |
| Slinger Conveyor | |||||
| Conveyor Drive/Width | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 5.5 kW/500 mm | 5.5 kW/500 mm |
| Thermo drum Unit | |||||
| Dryer Length x Diameter | 1.23 m x 6.02m | 1.54 m x 6.40m | 1.54 m x 6.7 m | 1.85 m x 7.31 m | 1.85 m x 8 m |
| Drive Type* | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | 4 WD Friction Drive |
| Drive Motor | 15 kW | 18.6 kW | 18.6 kW | 30 kW | 44 kW |
| Drive Gear Box | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear |
| Burner Unit | |||||
| Burner Capacity | 250 lph/3 MW | 350 lph/4 MW | 550 lph/6.5 MW | 770 lph/ 9 MW | 1100 lph/ 13 MW |
Additional Information:
Product Details:
| Brand | FABHND |
| Capacity | DM-50 |
| Voltage | 415 |
| Size | DM-30 to DM60 |
| Driven Type | Auto |
| Automation Grade | Manual |
Specifications:
| Capacity @ 3% moisture content | DM – 35 | DM – 45 | DM – 50 | DM – 60 | DM – 65 |
| Cold Feed Bins | |||||
| Capacity @ 3% moisture content | 45 tph | 60 tph | 90 tph | 120 tph | 150 tph |
| No.of Bins*/Total Storage | 4/20 m3 | 4/20 m3 | 4/25 m3 | 4/31.25 m3 | 4/37.5 m3 |
| capacity Auxiliary Drive | 1.1 kW | 1.5 kW | 1.5 kW | 2.2 kW | 2.2 kW |
| Auxiliary Conveyor Belt | 450 mm x 2.2 m | 450 mm x 2.2 m | 450 mm x 2.9 m | 450 mm x 3.78 m | 450 mm x 3.78 m |
| Charging Width Gathering | 2.55 m | 2.55 m | 3.05 m | 3.66 m | 3.66 m |
| Conveyor Drive Gathering | 3.7 kW | 3.7 kW | 3.7 kW | 5.5 kW | 5.5 kW |
| Conveyor Belt Feeding | 500 mm x 22.4 m | 500 mm x 22.4 m | 600 mm x 25.6 m | 600 mm x 29 m | 600 mm x 29 m |
| Capacity | 80 tph | 100 tph | 120 tph | 150 tph | 200 tph |
| Slinger Conveyor | |||||
| Conveyor Drive/Width | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 5.5 kW/500 mm | 5.5 kW/500 mm |
| Thermo drum Unit | |||||
| Dryer Length x Diameter | 1.23 m x 6.02m | 1.54 m x 6.40m | 1.54 m x 6.7 m | 1.85 m x 7.31 m | 1.85 m x 8 m |
| Drive Type* | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | 4 WD Friction Drive |
| Drive Motor | 15 kW | 18.6 kW | 18.6 kW | 30 kW | 44 kW |
| Drive Gear Box | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear |
| Burner Unit | |||||
| Burner Capacity | 250 lph/3 MW | 350 lph/4 MW | 550 lph/6.5 MW | 770 lph/ 9 MW | 1100 lph/ 13 MW |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 240/380V |
| Size | FAB-1500 |
| Automation Grade | Automatic |
| Capacity | 100 TPH |
| Model Name/Number | ECO WITH DM-50 |
| Driven Type | Diesel Engine |
Asphalt Batch Mix is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Voltage | 320 KW |
| Automation Grade | Automatic |
| Driven Type | SEMI AUTO |
| Usage/Application | Construction |
| Brand | FABHND |
| Size | FABHIND 1500 |
| I Deal In | New Only |
| Capacity | 120 TPH |
Asphalt Batch Mix is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Additional Information:
Product Details:
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415V |
| Capacity | 100 TPH |
| Material | Mild Steel |
We have designed Three Mobile Hot Mix Plant in order to ensure high mixing capacity, durability and resistivity against corrosion.
Features:
Product Details:
| Capacity | 100 ton per hours |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415V |
| Automation Grade | Automatic |
| Model Name/Number | FAB-1300-DM-50 |
| Country of Origin | Made in India |
| ROAD CONTRACTION | |
| TOWER WITH DRUM PLANT | |
| MODEL | PRODUCTION |
| FAB-1300 WITH DM-50 | 100 TPH |
| FAB-1300 WITH DM-50 WITH RAP | 100 TPH |
| FAB-ECO-1300 WITH DM-50 | 100 TPH |
| FAB-ECO-1300 WITH DM-50 WITH RAP | 100 TPH |
| FAB-1500 WITH DM-50 | 120 TPH |
| FAB-1500 WITH DM-50 WITH RAP | 120 TPH |
| FAB-ECO-1500 WITH DM-50 | 120 TPH |
| FAB-ECO-1500 WITH DM-50 WITH RAP | 120 TPH |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Road Construction Work |
| Model Name/Number | DM-50 FABHIND |
| Size | DM-50 |
| Brand | FABHND |
| Voltage | 415 |
| Automation Grade | SEMI AUTO |
| Driven Type | SEMI AUTO |
| Capacity | 100 tph |
Specifications:
| Capacity @ 3% moisture content | DM – 35 | DM – 45 | DM – 50 | DM – 60 | DM – 65 |
| Cold Feed Bins | |||||
| Capacity @ 3% moisture content | 45 tph | 60 tph | 90 tph | 120 tph | 150 tph |
| No.of Bins*/Total Storage | 4/20 m3 | 4/20 m3 | 4/25 m3 | 4/31.25 m3 | 4/37.5 m3 |
| capacity Auxiliary Drive | 1.1 kW | 1.5 kW | 1.5 kW | 2.2 kW | 2.2 kW |
| Auxiliary Conveyor Belt | 450 mm x 2.2 m | 450 mm x 2.2 m | 450 mm x 2.9 m | 450 mm x 3.78 m | 450 mm x 3.78 m |
| Charging Width Gathering | 2.55 m | 2.55 m | 3.05 m | 3.66 m | 3.66 m |
| Conveyor Drive Gathering | 3.7 kW | 3.7 kW | 3.7 kW | 5.5 kW | 5.5 kW |
| Conveyor Belt Feeding | 500 mm x 22.4 m | 500 mm x 22.4 m | 600 mm x 25.6 m | 600 mm x 29 m | 600 mm x 29 m |
| Capacity | 80 tph | 100 tph | 120 tph | 150 tph | 200 tph |
| Slinger Conveyor | |||||
| Conveyor Drive/Width | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 5.5 kW/500 mm | 5.5 kW/500 mm |
| Thermo drum Unit | |||||
| Dryer Length x Diameter | 1.23 m x 6.02m | 1.54 m x 6.40m | 1.54 m x 6.7 m | 1.85 m x 7.31 m | 1.85 m x 8 m |
| Drive Type* | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | 4 WD Friction Drive |
| Drive Motor | 15 kW | 18.6 kW | 18.6 kW | 30 kW | 44 kW |
| Drive Gear Box | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear |
| Burner Unit | |||||
| Burner Capacity | 250 lph/3 MW | 350 lph/4 MW | 550 lph/6.5 MW | 770 lph/ 9 MW | 1100 lph/ 13 MW |
Additional Information:
Product Details:
| Brand | FABHND |
| Voltage | 415 |
| Capacity | 120 tph |
| Size | FABHIND 1500 with DM-50 |
| Driven Type | Rotation |
| Automation Grade | Automatic |
| Brand/Make | FABHIND |
atch Type Asphalt Plant is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Product Details:
| Minimum Order Quantity | 1 Set |
| Capacity | 120 Ton per hours |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415 |
| Size | FAB-ECO-1500 ASPHALT BATCH MIX PLANT |
| Automation Grade | Automatic |
| Driven Type | Rotation |
| Model Name/Number | FAB-ECO-1500 ASPHALT BATCH MIX PLANT |
| Country of Origin | Made in India |
Asphalt Batch Mix is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Additional Information:
Product Details:
| Capacity | 90 to 100 Tons per hours |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415 |
| Size | DM-50 |
| Automation Grade | Semiautomatic |
| Driven Type | Rotation |
| Country of Origin | Made in India |
technical specification
asphalt batch mix plant model fab-1500 rap
asphalt hot mix batch type plant capacity 120 tph is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
the plant model fab 1500 performed 120 ton per hour, a single batch of 1500 kg with 80 cycles per hour. The capacity is based on mean density of 1. 6 ton/m3 and hot mix temperature 150° c at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
when density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
the plant is equipped with multiple assemblies which consist
o four bin feeder
o primary vibrating screen
o slinger conveyor
o dryer drum-8000 mm
o hot elevator unit
o vibrator unit
o pug mill unit
o hotbin unit
o bag house
o duct line
o dust cyclone
o exhauster - batch mix plant
o chimney for exhauster-6 mtr.
o bitumen tank - idh 30 kl
o bitumen tank - dh 30 kl
o ldo tank 18 kl
o diesel tank
o filler feeding unit
o bitumen filter assembly
o bitumen transfer pump 3 inch assly.
o rap single bin feeder
o rap-elevator
o rap slinger conveyor
o batch mix burner 25 hp with pump-ing 7. 5 hp
o batch mix control panel-fab-1500 -rap
o thermic oil heater unit
o bitumen transfer pump 2’’(optional)
o ldo/fo transfer pump (optional)
key features of fabhind asphalt batch mix plant
o rap recycle asphalt adding provision. (optional)
o duel fuel burner
o pug mill mixture
o skid mounted mixing tower
o bigger hot bin
o hot bin cylinder
Product Details:
| Minimum Order Quantity | 1 Unit |
| Capacity | 120 TPH |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415 |
| Size | DM-60 |
| Automation Grade | Semiautomatic |
| Driven Type | Rotation |
| Country of Origin | Made in India |
FABHIND premium asphalt batch mix plant requires complex process engineering which in turn depends on the perfect interaction between all the components. Hence it is essential that FABHIND manufactures all the vital parts of plant including burner, mixer, screen, Drum, filters, feeders, and controls.
DRYING DRUMFABHIND is an expert in the field of Asphalt Batching plant providing all solutions to your problems. You connect with us and we continue our services to you through life time.
COLD BIN FEEDERHot Mix material discharged from the Thermodrum is carried by inclined Hot Conveyor belt and discharged into the tipper / truck through Hydraulically operated Surge Storage Hopper. The Hot Conveyor belt is heat resistant, of reputed make like MRF / Dunlop / Equiv. This belt is supported by number of idlers and The frame is fabricated from appropriate size of channel and angles. A separate AC Motor with Gear Box is provided to run the Conveyor belt. Belt Scraper is provided to avoid any sticking of the mix material to the belt.
Hydraulically operated storage hopper is provided at the discharge end of the conveyor which stores the Hot Mix and allows it to fall as mass in batches and thus avoids segregation and spillage during load out cycle.
CONTROLSFully computerized control cabin (AC optional) with on board electrical power control console, distribution switch board, fully automatic process & sequence control are a standard on all Our Drum Mix Plants. User friendly software gives you total reliability and ensures top notch performance.
The State of Art SCADA System helps in total process controls and metering of the mix proportioning. The feedback from the Load cell is processed by the PLC, which further automatically controls and processes the bitumen and filler proportioning
BITUMEN INJETIONA high capacity hot oil jacketed gear type pump, controlled by an AC variable speed drive feeds the metered amount of bitumen into the mixing section of the Thermodrum unit. The fully automatic SCADA / PLC control ensures a precise metering of bitumen.
FILLER STORAGE UNITWe offers a wide range of filler storage and feeding solutions for the customers to choose from, depending on the site requirements. A variable speed computerized synchronized metering systems ensures the right proportioning in the mix
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Capacity | 60 TPH |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415V |
| Driven Type | SEMI AUTO |
| Country of Origin | Made in India |
| Automation Grade | Automatic |
| Size | DM-50 |
Specifications:
| Capacity @ 3% moisture content | DM – 35 | DM – 45 | DM – 50 | DM – 60 | DM – 65 |
| Cold Feed Bins | |||||
| Capacity @ 3% moisture content | 45 tph | 60 tph | 90 tph | 120 tph | 150 tph |
| No.of Bins*/Total Storage | 4/20 m3 | 4/20 m3 | 4/25 m3 | 4/31.25 m3 | 4/37.5 m3 |
| capacity Auxiliary Drive | 1.1 kW | 1.5 kW | 1.5 kW | 2.2 kW | 2.2 kW |
| Auxiliary Conveyor Belt | 450 mm x 2.2 m | 450 mm x 2.2 m | 450 mm x 2.9 m | 450 mm x 3.78 m | 450 mm x 3.78 m |
| Charging Width Gathering | 2.55 m | 2.55 m | 3.05 m | 3.66 m | 3.66 m |
| Conveyor Drive Gathering | 3.7 kW | 3.7 kW | 3.7 kW | 5.5 kW | 5.5 kW |
| Conveyor Belt Feeding | 500 mm x 22.4 m | 500 mm x 22.4 m | 600 mm x 25.6 m | 600 mm x 29 m | 600 mm x 29 m |
| Capacity | 80 tph | 100 tph | 120 tph | 150 tph | 200 tph |
| Slinger Conveyor | |||||
| Conveyor Drive/Width | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 5.5 kW/500 mm | 5.5 kW/500 mm |
| Thermo drum Unit | |||||
| Dryer Length x Diameter | 1.23 m x 6.02m | 1.54 m x 6.40m | 1.54 m x 6.7 m | 1.85 m x 7.31 m | 1.85 m x 8 m |
| Drive Type* | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | 4 WD Friction Drive |
| Drive Motor | 15 kW | 18.6 kW | 18.6 kW | 30 kW | 44 kW |
| Drive Gear Box | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear |
| Burner Unit | |||||
| Burner Capacity | 250 lph/3 MW | 350 lph/4 MW | 550 lph/6.5 MW | 770 lph/ 9 MW | |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Driven Type | Auto |
| Country of Origin | Made in India |
| Capacity | FAB-1500 |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415V |
| Size | FABHIND 1500 |
| Automation Grade | Automatic |
Asphalt Hot Mix Batch Type Plant Capacity 120 Tph Is Ideally Operating With 3 % Moisture Content. The Plant Is Fully Automatic Electro-pneumatic Computerized Controlled Panel And Also Manual Override Control.
The Plant Model Fab 1500 Performed 120 Ton Per Hour, A Single Batch Of 1500 Kg With 80 Cycles Per Hour. The Capacity Is Based On Mean Density Of 1.6 Ton/m3 And Hot Mix Temperature 150° C At Mixer Outlet. The Rated Production Capacity Is Depend Upon Mix Temperature, Moisture Percentage, Aggregate Density, Filler Moisture And Controlled Dust.
When Density Or Mix Temperature Is Not As Per The Stated Requirement, The Production Capacity May Drop As A Result.
The Plant Is Equipped With Multiple Assemblies Which Consist
O Four Bin Feeder
O Primary Vibrating Screen
O Slinger Conveyor
O Dryer Drum-8000 Mm
O Hot Elevator Unit
O Vibrator Unit
O Pug Mill Unit
O Hotbin Unit
O Bag House
O Duct Line
O Dust Cyclone
O Exhauster - Batch Mix Plant
O Chimney For Exhauster-6 Mtr.
O Bitumen Tank - Idh 30 Kl
O Bitumen Tank - Dh 30 Kl
O Ldo Tank 18 Kl
O Diesel Tank
O Filler Feeding Unit
O Bitumen Filter Assembly
O Bitumen Transfer Pump 3 Inch Assly.
O Rap Single Bin Feeder
O Rap-elevator
O Rap Slinger Conveyor
O Batch Mix Burner 25 Hp With Pump-ing 7.5 Hp
O Batch Mix Control Panel-fab-1500 -rap
O Thermic Oil Heater Unit
O Bitumen Transfer Pump 2’’(Optional)
O Ldo/fo Transfer Pump (Optional)
Key Features Of Fabhind Asphalt Batch Mix Plant
O Rap Recycle Asphalt Adding Provision. (Optional)
O Duel Fuel Burner
O Pug Mill Mixture
O Skid Mounted Mixing Tower
O Bigger Hot Bin
O Hot Bin Cylinder
Request
Additional Information:
Product Details:
| Capacity | FAB-2000 |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 240/380V |
| Size | FABHIND -2000 |
| Automation Grade | Automatic |
| Driven Type | Auto |
| Country of Origin | Made in India |
ASPHALT BATCH MIX PLANT MODEL FAB-1500 RAP
ASPHALT HOT MIX BATCH TYPE PLANT capacity 120 TPH is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Product Details:
| Capacity | 120 TPH |
| Usage/Application | Asphalt Road Building |
| Brand | FABHND |
| Voltage | 240/380V |
| Size | as per discussion |
| Automation Grade | Automatic |
| Driven Type | Auto |
| Power Rating | 320 KW |
| Country of Origin | Made in India |
ASPHALT BATCH MIX PLANT MODEL FAB-1500 RAP
ASPHALT HOT MIX BATCH TYPE PLANT capacity 120 TPH is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Road Construction |
| Brand | FABHIND |
| Voltage | 415 |
| Driven Type | AUTO |
| Country of Origin | Made in India |
| Size | FAB-1500 |
| Automation Grade | Automatic |
| Capacity | 120 TPH |
ECHNICAL SPECIFICATION
ASPHALT BATCH MIX PLANT MODEL FAB-1500 RAP
ASPHALT HOT MIX BATCH TYPE PLANT capacity 120 TPH is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Additional Information:
Product Details:
| Capacity | 90 TPH |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415V |
| Automation Grade | Automatic |
| Country of Origin | Made in India |
Specifications:
| Capacity @ 3% moisture content | DM – 35 | DM – 45 | DM – 50 | DM – 60 | DM – 65 |
| Cold Feed Bins | |||||
| Capacity @ 3% moisture content | 45 tph | 60 tph | 90 tph | 120 tph | 150 tph |
| No.of Bins*/Total Storage | 4/20 m3 | 4/20 m3 | 4/25 m3 | 4/31.25 m3 | 4/37.5 m3 |
| capacity Auxiliary Drive | 1.1 kW | 1.5 kW | 1.5 kW | 2.2 kW | 2.2 kW |
| Auxiliary Conveyor Belt | 450 mm x 2.2 m | 450 mm x 2.2 m | 450 mm x 2.9 m | 450 mm x 3.78 m | 450 mm x 3.78 m |
| Charging Width Gathering | 2.55 m | 2.55 m | 3.05 m | 3.66 m | 3.66 m |
| Conveyor Drive Gathering | 3.7 kW | 3.7 kW | 3.7 kW | 5.5 kW | 5.5 kW |
| Conveyor Belt Feeding | 500 mm x 22.4 m | 500 mm x 22.4 m | 600 mm x 25.6 m | 600 mm x 29 m | 600 mm x 29 m |
| Capacity | 80 tph | 100 tph | 120 tph | 150 tph | 200 tph |
| Slinger Conveyor | |||||
| Conveyor Drive/Width | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 5.5 kW/500 mm | 5.5 kW/500 mm |
| Thermo drum Unit | |||||
| Dryer Length x Diameter | 1.23 m x 6.02m | 1.54 m x 6.40m | 1.54 m x 6.7 m | 1.85 m x 7.31 m | 1.85 m x 8 m |
| Drive Type* | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | 4 WD Friction Drive |
| Drive Motor | 15 kW | 18.6 kW | 18.6 kW | 30 kW | 44 kW |
| Drive Gear Box | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear |
| Burner Unit | |||||
| Burner Capacity | 250 lph/3 MW | 350 lph/4 MW | 550 lph/6.5 MW | 770 lph/ 9 MW | |
Product Details:
| Capacity | FAB-1500 RAP 120 TPH |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 320 KW |
| Size | FABHIND 1500 |
| Automation Grade | Auto |
| Driven Type | Auto |
| Country of Origin | Made in India |
TECHNICAL SPECIFICATION
ASPHALT BATCH MIX PLANT MODEL FAB-1500 RAP
ASPHALT HOT MIX BATCH TYPE PLANT capacity 120 TPH is ideally operating with 3 % moisture content. The plant is fully automatic electro-pneumatic computerized controlled panel and also manual override control.
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
The plant is equipped with multiple assemblies which consist
o Four Bin Feeder
o Primary Vibrating Screen
o Slinger Conveyor
o Dryer Drum-8000 MM
o Hot Elevator Unit
o Vibrator Unit
o Pug Mill Unit
o Hotbin Unit
o Bag House
o Duct Line
o Dust Cyclone
o Exhauster - Batch Mix Plant
o Chimney For Exhauster-6 Mtr.
o Bitumen Tank - IDH 30 Kl
o Bitumen Tank - DH 30 Kl
o Ldo Tank 18 KL
o Diesel Tank
o Filler Feeding Unit
o Bitumen Filter Assembly
o Bitumen Transfer Pump 3 Inch Assly.
o Rap Single Bin Feeder
o Rap-elevator
o Rap Slinger Conveyor
o Batch Mix Burner 25 HP With Pump-ing 7.5 HP
o Batch Mix Control Panel-FAB-1500 -RAP
o Thermic Oil Heater Unit
o Bitumen Transfer Pump 2’’(optional)
o Ldo/fo Transfer Pump (optional)
Key Features Of FABHIND Asphalt Batch Mix Plant
o Rap Recycle Asphalt Adding Provision. (optional)
o Duel Fuel Burner
o Pug Mill Mixture
o Skid Mounted Mixing Tower
o Bigger Hot Bin
o Hot Bin Cylinder
Product Details:
| Capacity | 180 TPH |
| Usage/Application | Road Construction |
| Brand | FABHND |
| Voltage | 415 V |
| Automation Grade | Automatic |
| Country of Origin | Made in India |
The plant Model FAB 1500 performed 120 ton per hour, a single batch of 1500 Kg with 80 cycles per hour. The capacity is based on mean density of 1.6 ton/m3 and hot mix temperature 150° C at mixer outlet. The rated production capacity is depend upon mix temperature, moisture percentage, aggregate density, filler moisture and controlled dust.
When density or mix temperature is not as per the stated requirement, the production capacity may drop as a result.
Product Details:
| Capacity | 220 Ton |
| Voltage | 280 V |
| Usage/Application | Construction |
| Automation Grade | Semi-Automatic |
| Country of Origin | Made in India |
Specifications:
| Capacity @ 3% moisture content | DM – 35 | DM – 45 | DM – 50 | DM – 60 | DM – 65 |
| Cold Feed Bins | |||||
| Capacity @ 3% moisture content | 45 tph | 60 tph | 90 tph | 120 tph | 150 tph |
| No.of Bins*/Total Storage | 4/20 m3 | 4/20 m3 | 4/25 m3 | 4/31.25 m3 | 4/37.5 m3 |
| capacity Auxiliary Drive | 1.1 kW | 1.5 kW | 1.5 kW | 2.2 kW | 2.2 kW |
| Auxiliary Conveyor Belt | 450 mm x 2.2 m | 450 mm x 2.2 m | 450 mm x 2.9 m | 450 mm x 3.78 m | 450 mm x 3.78 m |
| Charging Width Gathering | 2.55 m | 2.55 m | 3.05 m | 3.66 m | 3.66 m |
| Conveyor Drive Gathering | 3.7 kW | 3.7 kW | 3.7 kW | 5.5 kW | 5.5 kW |
| Conveyor Belt Feeding | 500 mm x 22.4 m | 500 mm x 22.4 m | 600 mm x 25.6 m | 600 mm x 29 m | 600 mm x 29 m |
| Capacity | 80 tph | 100 tph | 120 tph | 150 tph | 200 tph |
| Slinger Conveyor | |||||
| Conveyor Drive/Width | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 3.7 kW/ 500 mm | 5.5 kW/500 mm | 5.5 kW/500 mm |
| Thermo drum Unit | |||||
| Dryer Length x Diameter | 1.23 m x 6.02m | 1.54 m x 6.40m | 1.54 m x 6.7 m | 1.85 m x 7.31 m | 1.85 m x 8 m |
| Drive Type* | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | Cradle type chain drive | 4 WD Friction Drive |
| Drive Motor | 15 kW | 18.6 kW | 18.6 kW | 30 kW | 44 kW |
| Drive Gear Box | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear | Heavy Duty Worm Gear |
| Burner Unit | |||||
| Burner Capacity | 250 lph/3 MW | 350 lph/4 MW | 550 lph/6.5 MW | 770 lph/ 9 MW | 1100 lph/ 13 MW |
Product Details:
| Usage/Application | Road Construction |
| Brand | FABHND |
| Model Name/Number | DM-60 |
| Voltage | 415V |
| Size | DM-50 |
| Automation Grade | SEMI AUTO |
| Driven Type | AUTO |
| Capacity | 70 TPH |
| Material | Mild Steel |
We have designed Mobile Hot Mix Plant in order to ensure high mixing capacity, durability and resistivity against corrosion.
Features:
Additional Information: