Tyre Cutting Machine

Product Details:

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.

Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.

The Sidewall Cutter machine picks up whole tyres, cuts the sidewalls using a tool steel grade cutting blade, and drops the cut tyre back on the ground. Two sidewalls and one tread portion are left after this operation.

The main advantage of cutting the tyre sidewalls is that it allows for additional tyre processing: with the rubber bead properly isolated, shredding becomes considerably easier. This is due to the presence of a thick steel belt in the bead section, which causes excessive wear on most shredders. The tread piece can be easily shredded once the sidewall has been removed.

• Cut the truck tyre in three pieces
• Feeding of the reactor will increase up to the capacity
• Reduce purchase cost of tyre by purchasing whole tyre in bulk quantity(auction)
• Increase profit by decreasing production costing
• Easy to install
• Less maintenance require

Product Details:

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.

Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.

The Sidewall Cutter machine picks up whole tyres, cuts the sidewalls using a tool steel grade cutting blade, and drops the cut tyre back on the ground. Two sidewalls and one tread portion are left after this operation.

The main advantage of cutting the tyre sidewalls is that it allows for additional tyre processing: with the rubber bead properly isolated, shredding becomes considerably easier. This is due to the presence of a thick steel belt in the bead section, which causes excessive wear on most shredders. The tread piece can be easily shredded once the sidewall has been removed.

• Cut the truck tyre in three pieces
• Feeding of the reactor will increase up to the capacity
• Reduce purchase cost of tyre by purchasing whole tyre in bulk quantity(auction)
• Increase profit by decreasing production costing
• Easy to install
• Less maintenance require
• Capacity: 9 to 10 Tons of Truck Tyres (1020mm Or 1040mm) in a one shift (10 Hrs.)

Additional Information:

• Item Code: FAB-TYRECUTTER
• Production Capacity: 200 TYRE PER DAY
• Delivery Time: 2 WEEK
• Packaging Details: LOOSE TRUCK LOAD

Product Details:

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.

Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.

The Sidewall Cutter machine picks up whole tyres, cuts the sidewalls using a tool steel grade cutting blade, and drops the cut tyre back on the ground. Two sidewalls and one tread portion are left after this operation.

The main advantage of cutting the tyre sidewalls is that it allows for additional tyre processing: with the rubber bead properly isolated, shredding becomes considerably easier. This is due to the presence of a thick steel belt in the bead section, which causes excessive wear on most shredders. The tread piece can be easily shredded once the sidewall has been removed.

• Cut the truck tyre in three pieces
• Feeding of the reactor will increase up to the capacity
• Reduce purchase cost of tyre by purchasing whole tyre in bulk quantity(auction)
• Increase profit by decreasing production costing
• Easy to install
• Less maintenance require
• Capacity: 9 to 10 Tons of Truck Tyres (1020mm Or 1040mm) in a one shift (10 Hrs.)

Additional Information:

• Item Code: TYRECUTTER
• Production Capacity: TYRE CUTTER MACHINE
• Delivery Time: 2 WEEK
• Packaging Details: TRUCK LOAD

Product Details:

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.

Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.

The Sidewall Cutter machine picks up whole tyres, cuts the sidewalls using a tool steel grade cutting blade, and drops the cut tyre back on the ground. Two sidewalls and one tread portion are left after this operation.

The main advantage of cutting the tyre sidewalls is that it allows for additional tyre processing: with the rubber bead properly isolated, shredding becomes considerably easier. This is due to the presence of a thick steel belt in the bead section, which causes excessive wear on most shredders. The tread piece can be easily shredded once the sidewall has been removed.

• Cut the truck tyre in three pieces
• Feeding of the reactor will increase up to the capacity
• Reduce purchase cost of tyre by purchasing whole tyre in bulk quantity(auction)
• Increase profit by decreasing production costing
• Easy to install
• Less maintenance require
• Capacity: 9 to 10 Tons of Truck Tyres (1020mm Or 1040mm) in a one shift (10 Hrs.)

Additional Information:

• Item Code: FABHIND-STRIPCUTTRER
• Production Capacity: 200 KG PER HOURS
• Delivery Time: 2 WEEK
• Packaging Details: TRUCK LOAD

Product Details:

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.

Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.

The Sidewall Cutter machine picks up whole tyres, cuts the sidewalls using a tool steel grade cutting blade, and drops the cut tyre back on the ground. Two sidewalls and one tread portion are left after this operation.

The main advantage of cutting the tyre sidewalls is that it allows for additional tyre processing: with the rubber bead properly isolated, shredding becomes considerably easier. This is due to the presence of a thick steel belt in the bead section, which causes excessive wear on most shredders. The tread piece can be easily shredded once the sidewall has been removed.

• Cut the truck tyre in three pieces
• Feeding of the reactor will increase up to the capacity
• Reduce purchase cost of tyre by purchasing whole tyre in bulk quantity(auction)
• Increase profit by decreasing production costing
• Easy to install
• Less maintenance require

Additional Information:

• Item Code: FABHINDTYRESHEDDER
• Production Capacity: 250 TPH
• Delivery Time: 2 WEEK
• Packaging Details: TRUCK LOAD